Odroid C1+

The ODroid C1 motherboard has been immensely popular in it's run since the top of the year, thanks partly to great hardware and excellent software support for the small price tag.

In mid June the ODroid C1 went globally out of stock with the next production run to be scheduled in early August. Hard Kernel took the opportunity to reinvent the ODroid C1 into something better, something even greater than before.

It’s still very much based on ODROID-C1 with Amlogic S805 processor, 1GB RAM, and an eMMC sockets, but Hardkernel made the following improvements:

  • HDMI connector change to Type-A from Type-D (micro HDMI).

  • Improved SD card compatibility

  • CEC function whether the RTC backup battery is installed or not

  • ODROID-C1+ can be powered from the USB OTG port as well as DC-Jack

  • I2S signals exposed for external audio DAC

  • The heatsink is now standard as part of the unit

  • Buy Now! Orders of 5+
    • * Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs

    • * Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)

    • * 1Gbyte DDR3 SDRAM

    • * Gigabit Ethernet

    • * 40pin GPIOs

    • * eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot

    • * USB 2.0 Host x 4, USB OTG x 1,

    • * Infrared(IR) Receiver

    • * Uses Ubuntu 14.04 or Android KitKat operating systems

    ODROID-C1RPi 2 Model B
    Amlogic S805 SoC
    4 x ARM® Cortex®-A5 1.5GHz
    ARMv7 Architecture @28nm
    Broadcom BCM2836
    4 x ARM® Cortex®-A7 900Mhz
    ARMv7 Architecture @40nm
    GPU2 x ARM® Mali™-450MP 600MHz1 x VideoCore IV 250MHz
    RAM1GB 32bit DDR3 792MHz1GB 32bit LP-DDR2 400MHz
    Flash StorageMicro-SD UHS-1@100Mhz/SDR50 or eMMC storage optionMicro-SD @50Mhz/SDR25, No eMMC storage option
    USB2.0 Host4 Ports4 Ports
    USB2.0 Device / OTG1 Port for Linux USB Gadget driverNo
    Ethernet/LAN10/100/1000 Mbit/s10/100 Mbit/s
    Video OutputHDMIHDMI / Composite RCA
    Audio OutputHDMIHDMI / 3.5mm Jack
    Camera InputUSB 720pMIPI CSI 1080p
    Real Time ClockYES (On-board RTC)No(unless using an add-on module)
    IR ReceiverYES (On-board IR Sensor)No(unless using an add-on module)
    IO Expansion40pin port (GPIO/UART/SPI/I2C/ADC)40pin port (GPIO/UART/SPI/I2C/I2S)
    ADC10bit SAR 2 channelsNo(unless using an add-on board)
    Size85 x 56mm (3.35” x 2.2”)85 x 56mm (3.35” x 2.2”)
    Weight40g (1.41 oz)42g (1.48 oz)
    Width (mm) 85
    Depth (mm) 22
    Height (mm) 56
    Weight (g) 500

    Please note: product specifications, features, images and related downloads are subject to change at Lilliput UK's discretion at any time without prior notification. Lilliput UK Ltd cannot be held liable for outdated product information. Should customers have any queries about listed product specifications, please call Lilliput UK Ltd on +44 0845 0068868.

    © Copyright 1997-2017 - Lilliput UK Ltd. All rights reserved.

    Lilliput UK Ltd operates the European distribution centre for Lilliput products. Lilliput UK are specialists in 7 inch monitors, 8 inch monitors, 10 inch monitors, and touch screen monitors. We provide European customers with access to the latest Lilliput stock, fast and affordable delivery and a local point of contact. Please click here to buy direct. Please click here to view our returns policy.

    Lilliput UK are specialists in touch screen monitors, 5" monitors, 7" monitors, 8" monitors, 10" monitors, VGA monitors, HDMI monitors, DVI monitors, USB monitors, composite video monitors, field monitors, panel PCs, in-car PCs.